Make a monster macro lens for your mobile from an old CD player

This month’s Practical Photography magazine has a “how to” on harvesting the CD/DVD read lens from an old CD player to convert your mobile phone’s camera into a pretty impressive macro camera. I just happen to have a broken laptop that I’ve not yet recycled so I pulled the CD/DVD player out. Staring up at you when you open a laptop CD/DVD player is a convex lens. That’s actually the laser lens. UPDATE: I’ve now uploaded a selection of macro shots to my Imaging Storm site.

You don’t want that bit, I tried that by popping it out of the player and putting it gently on to my phone camera but it does nothing. No, the lens you want is the slightly larger, flatter lens behind the laser lens. In my old laptop’s CD player there were a couple of prisms between the laser lens and the read lens, but unscrewing a panel and prising it out with a pair of tweezers (I used a lens cleaning cloth between the jaws to soften their grip and avoid scratching the lens).

You can give the lens a clean with an airbrush and an alcohol wipe and then “mount” it on your phone camera lens. It has to be flat and in direct contact to work. For my tests I started up the Airdroid app so that I had remote control of the camera and put the phone face down with the CD lens in place. It’s almost impossible to keep your hand sufficiently steady to photograph something with this setup, but I had a brainwave and plonked my trusty old Swiss Army Knife, complete with mini screwdriver wrapped in the corkscrew and Sugru repairs, onto the phone in such a position that I could take a photo of said screwdriver. Clicking “shutter” control in Airdroid brought it into focus and grabbed the shot.

The Swiss knife would make a useful platform on which to mount objects for other macro shots. But, I need a more practical solution for keeping the CD lens in position (temporarily) and for holding the phone steady and close to objects I want in macro. The magazine suggest a piece of card with a hole in it and an elastic band for holding the lens in place. So that’s the next step. In the meantime, the lens is safe in an old SD card case.

Funnily enough, when I first bought a pocket digital camera back in 2003/2004 or thereabouts one of the first things I photographed to test its macro capabilities was this old Swiss Army Knife…

More information about Practical Photography here.

UPDATE: I opened my Sugru tin and inside…a flat Lego square, the central but just about exactly the size of the lens, so I bored a hole through it with a bradawl and a posidrive screwdriver (saved getting the electric drill out), cleaned up the edges with the penknife and then nudged the lens into the hole from the bottum up, making sure it was flush with the lower edge of the Lego. Perfect fit. And, the Lego lens still fits into the SD card case.

The next shot of one of the chips from the cannabilised CD drive was taken with this new mount and the chip Sellotaped to the penknife to keep it steady at the right height from the lens.

I’m sure the team at Sugru will be a little disappointed that I used the Lego square and none of the Sugru. I did, however, use an unopened package to tilt the penknife slightly to get the chip I’d mounted on the corkscrew will Sellotape more square on to the lens! Next obvious step would be to use the Sugru to construct a better mount for macro subjects…

Author: bob投注平台

Award-winning freelance science writer, author of Deceived Wisdom. Sharp-shooting photographer and wannabe rockstar.